HTB1C0DM9LP
Common Specifications |
No. of
EX Modules that can be connected |
Up
to 7 units per HTB |
Input
Voltage |
DC24V |
Rated
Voltage |
DC20.4 to 26.4V (including ripple) |
Power
Consumption |
19W
(Communication module with (max.) 7 EX
modules.) |
Installation Configuration |
Attachment via 35mm DIN rail |
Weight |
185g
[0.4lb] max. (unit only) |
Input Specifications |
Input
Points |
12
points with common line |
Input
Type |
Source / Sink input |
Rated
Input Current |
5mA
/ input (DC24V) (I0, I1, I6, I7)
7mA / input (DC24V) (I2 to I5, I8 to I11) |
Input
Impedance |
5.0kΩ (I0, I1, I6, I7)
3.4kΩ (I2~I5, I8~I11) |
Input
Delay Time |
OFF→ON |
35μs
+ filter value (I0, I1, I6, I7)
40μs + filter value (I2 to I5, I8 to I11) |
ON→OFF |
45μs
+ filter value (I0, I1, I6, I7)
150μs + filter value (I2 to I5, I8 to I11) |
Isolation Method |
Between input terminals : not isolated
Internal circuit : photocoupler isolated (isolation
protection put to AC500V rms) |
Output Specifications
(Q0 , Q1) |
Output
Points |
2
points |
Output
Type |
Source output |
Common
Design |
2
points / 1common |
Maximum
Load Current |
1A
per common line |
Voltage
drop (on voltage) |
DC1V
(max.) (voltage between COM and output
terminals when output is on) |
Output
Delay Time |
OFF→ON |
5μs
(max.) |
ON→OFF |
5μs(max.) |
Isolation Method |
Between output terminal and internal circuit
: photocoupler isolated (isolation
protection up to AC500 V rms)
Between output terminals: not isolated |
Output Specifications
(Q2~Q7) |
Output
Points |
6
points |
Output
Type |
Relay output |
Common
Design |
COM1
: 3 , NO contacts
COM2 : 2 , NO contacts
COM3 : 1 , NO contacts |
Maximum
Load Current |
2A
per output , 8A per common line |
Dielectric strength |
Between output to internal circuit:
AC1500Vrms, 1min
Between output to terminals (COMs):
AC750Vrms, 1min |
Output
Delay Time |
OFF→ON |
10ms(max.) (Bounce time not included) |
ON→OFF |
5ms(max.)
(Bounce time not included) |